ADCX Series
The Millivolt Output pressure sensor is based upon a proprietary technology to reduce all output offset or common mode errors. This model provides a calibrated millivolt output with superior output offset characteristics. Output offset errors due to change in temperature, stability to warm-up, stability to long time period, and position sensitivity are all significantly reduced when compared to conventional compensation methods. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. This s eries is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to +16 V is acceptable.
-
Features
- 0.5 to 30 inH2O
- Temperature Compensated
- Calibrated Zero and Span
-
Applications
- Medical Instrumentation
- Environmental Controls
- HVAC
equivalent Circuit
Pressure Sensor Maximum Ratings
Environmental Specification
Help Me Choose
Choose A Part Number Below To View Performance Characteristics
| Pressure Range | Differential | Absolute | Gauge |
| 0.5 inH2O | 0.5 INCH-D-MV | -- | -- |
| 1 inH2O | 1 INCH-D-MV | -- | -- |
| 2 inH2O | 2 INCH-D-MV | -- | -- |
| 5 inH2O | 5 INCH-D-MV | -- | -- |
| 10 inH2O | 10 INCH-D-MV | -- | -- |
| 20 inH2O | 20 INCH-D-MV | -- | -- |
| 30 inH2O | 30 INCH-D-MV | -- | -- |
10 INCH-D-MV Performance Characteristics
Close| PARAMETER | MIN | NOM | MAX | UNITS | Notes |
| Operating Range, differential pressure | -- | 10.0 | -- | inH2O | - |
| Output Span | 19.0 | 20.0 | 21.0 | mV | 5 |
| Offset Voltage @ zero differential pressure | -- | -- | ±500 | uV | - |
| Offset Temperature Shift (0°C-70°C) | -- | -- | ±150 | uV | 2 |
| Offset Warm-up Shift | -- | -- | ±50 | uV | 3 |
| Offset Position Sensitivity (1g) | -- | -- | ±5 | uV | - |
| Offset Long Term Drift (one year) | -- | -- | ±100 | uV | - |
| Linearity, hysteresis error | -- | 0.05 | 0.25 | %fs | 4 |
| Span Shift (0°C-70°C) | -- | -- | ±200 | uV | 2 |
Standard Pressure Range
Specification notes
NOTE 1: ALL PARAMETERS ARE MEASURED AT 12.0 VOLT EXCITATION, FOR THE NOMINAL FULL SCALE PRESSURE AND ROOM TEMPERATURE UNLESS OTHERWISE SPECIFIED. PRESSURE MEASUREMENTS ARE WITH POSITIVE PRESSURE APPLIED TO PORT B.
NOTE 2: SHIFT IS RELATIVE TO 25°C.
NOTE 3: SHIFT IS WITHIN THE FIRST HOUR OF EXCITATION APPLIED TO THE DEVICE.
NOTE 4: MEASURED AT ONE-HALF FULL SCALE RATED PRESSURE USING BEST STRAIGHT LINE CURVE FIT.
NOTE 5: THE VOLTAGE ADDED TO THE OFFSET VOLTAGE AT FULL SCALE PRESSURE.
LinkedIn