ACPC Series H-Grade Pressure Sensors

Send Me Product Information
Buy Now | Online Store
Datasheet Download

The Miniature series pressure sensors are based upon a proprietary technology to reduce the size of the sensor and yet maintain a high level of performance. This model provides a calibrated millivolt output with superior output offset characteristics. Output offset errors due to change in temperature, stability to warm-up, stability to long time period, and position sensitivity are all significantly reduced when compared to conventional compensation methods. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.   These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The H-GRADE is a high accuracy version of the millivolt output pressure sensors.   The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage.

  • Features

    • 4 inH2O to 100 PSI Pressure Ranges
    • 0.5 % linearity...high accuracy version
    • Temperature Compensated
    • Calibrated Zero and Span

  • Applications

    • Medical Instrumentation
    • Environmental Controls
    • HVAC

equivalent Circuit

Pressure Sensor Maximum Ratings

Supply Supply Voltage VS

16 Vdc

Common-mode pressure

50 psig

Lead Temperature (soldering 2-4 sec.)

250°C

Environmental Specification

Compensated

0 to (50)70°C

Operating

-25 to 85°C

Storage

-40 to 125°C

Humidity Limits

0 to 95% RH (non condensing)

Available Package

Click On Package Image Below To View Package Drawing

Help Me Choose

Choose A Part Number Below To View Performance Characteristics

Pressure Range Differential Absolute Gauge
4 inH2O 4 INCH-D-HGRADE-MINI -- 4 INCH-G-HGRADE-MINI 4 INCH-GF-HGRADE-MINI
0.3 PSI 0.3 PSI-D-HGRADE-MINI -- 0.3 PSI-G-HGRADE-MINI 0.3 PSI-GF-HGRADE-MINI
10 inH2O 10 INCH-D-HGRADE-MINI -- 10 INCH-G-HGRADE-MINI 10 INCH-GF-HGRADE-MINI
1 PSI 1 PSI-D-HGRADE-MINI -- 1 PSI-G-HGRADE-MINI 1 PSI-GF-HGRADE-MINI
5 PSI 5 PSI-D-HGRADE-MINI -- 5 PSI-G-HGRADE-MINI 5 PSI-GF-HGRADE-MINI
15 PSI 15 PSI-D-HGRADE-MINI 15 PSI-A-HGRADE-MINI 15 PSI-AF-HGRADE-MINI 15 PSI-G-HGRADE-MINI 15 PSI-GF-HGRADE-MINI
30 PSI 30 PSI-D-HGRADE-MINI 30 PSI-A-HGRADE-MINI 30 PSI-AF-HGRADE-MINI 30 PSI-G-HGRADE-MINI 30 PSI-GF-HGRADE-MINI
100 PSI -- -- 100 PSI-G-HGRADE-MINI 100 PSI-GF-HGRADE-MINI
 

15 PSI-GF-HGRADE-MINI Performance Characteristics

Close
PARAMETER MIN NOM MAX UNITS Notes
Operating Range, gage pressure - 15.0 - PSIG -
Output Span 89.1 90.0 90.9 mV 5
Offset Voltage @ zero gage pressure - - ±0.5 mV -
Offset Temperature Shift (0°C-70°C) - - ±0.5 mV 2
Linearity, hysteresis error - 0.25 0.5 %fs 4
Span Shift (0°C-70°C) - - ±1 %fs 2

Standard Pressure Range

Operating Pressure

0-15 PSIG

Specification notes

NOTE 1: ALL PARAMETERS ARE MEASURED AT 12.0 VOLT EXCITATION, FOR THE NOMINAL FULL SCALE PRESSURE AND ROOM TEMPERATURE UNLESS OTHERWISE SPECIFIED. PRESSURE MEASUREMENTS ARE WITH POSITIVE PRESSURE APPLIED TO PORT B.


NOTE 2: SHIFT IS RELATIVE TO 25°C.


NOTE 3: SHIFT IS WITHIN THE FIRST HOUR OF EXCITATION APPLIED TO THE DEVICE.


NOTE 4: MEASURED AT ONE-HALF FULL SCALE RATED PRESSURE USING BEST STRAIGHT LINE CURVE FIT.


NOTE 5: THE VOLTAGE ADDED TO THE OFFSET VOLTAGE AT FULL SCALE PRESSURE.

Standard Package