DLVR Series

The DLVR Series mini digital output pressure sensor is based on All Sensors' CoBeam2 TM Technology. This reduces package stress susceptibility, resulting in improved overall long term stability. The technology also vastly improves position sensitivity compared to single die devices.

The supply voltage options ease integration of the sensors into a wide range of process control and measurement systems, allowing direct connection to serial communications channels. For battery-powered systems, the sensors can enter very low-power modes between readings to minimize load to power supply.

These calibrated and compensated sensors provide an accurate, stable output over a wide temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. A protective parylene coating is optionally available for moisture/harsh media protection.

  • Features

    • 0.5 to 60 inH2O Pressure Ranges
    • 3.3V or 5V Supply Voltage Option
    • I2C or SPI Interface Option
    • Better than 0.5% Accuracy Over Temperature (Typical)
  • Applications

    • Medical Breathing
    • Environmental Controls
    • HVAC
    • Industrial Controls
    • Portable/Hand-held Equipment

equivalent Circuit

Pressure Sensor Maximum Ratings

Supply Voltage, Vs

6 Vdc

Common Mode Pressure

10 psig

Lead Temperature (soldering 2-4 sec.)


Environmental Specification

Compensated Operating



0 to 70°C


-20 to 85°C


-25 to 85°C


-40 to 125°C

Humidity Limits

0 to 95% (non condensing)

Help Me Choose

Choose A Part Number Below To View Performance Characteristics

Pressure Range Differential Absolute Gauge
0.5 inH2O DLVR-F50D -- --
1 inH2O DLVR-L01D -- DLVR-L01G
2 inH2O DLVR-L02D -- DLVR-L02G
5 inH2O DLVR-L05D -- DLVR-L05G
10 inH2O DLVR-L10D -- DLVR-L10G
20 inH2O DLVR-L20D -- DLVR-L20G
30 inH2O DLVR-L30D -- DLVR-L30G
60 inH2O DLVR-L60D -- DLVR-L60G

20INCH-D1-P4V-MINI Performance Characteristics

Operating Range, differential pressure - ±20.0 - “H2O -
Output Span ±1.90 ±2.0 ±2.10 volt 5
Offset Voltage @ zero differential pressure 2.15 2.25 2.35 volt -
Offset Temperature Shift (-25°C-85°C) - - ±20 mvolt 2
Offset Warm-up Shift - ±5 - mvolt 3
Offset Position Sensitivity (±1g) - ±5 - mvolt -
Offset Long Term Drift (one year) - ±5 - mvolt -
Linearity, hysteresis error - 0.05 0.25 %fs 4
Span Shift (-25°C-85°C) - - ±1 %span 2

Standard Pressure Range

Operating Pressure

±20 In H2O

Nominal Span

4 V

Proof Pressure

300 In H2O

Burst Pressure

500 In H2O

Specification notes

NOTE 1: The span is the algebraic difference between full scale decimal counts and the offset decimal counts.

 Pressure Output Transfer Function:



               Poutdig                            Is the sensor 14 bit digital output

               OSdig                              Is the specified digital offset (gage = 1,638 and differential = 8,192)

               FSS (inH2O)                 Is the sensor Full Scale Span in inH2O (gage = Full Scale Pressure, differential = 2x Full Scale Pressure)


NOTE 2: Total error band comprises of offset and span temperature and calibration errors, linearity and pressure hysteresis errors, offset warm-up shift, offset position sensitivity and long term offset drift errors.

NOTE 3: Shift is relative to 25°C.

NOTE 4: Shift is within the first hour of excitation applied to the device.

NOTE 5: Parameter is characterized and not 100% tested.

NOTE 6: Measured at one-half full scale rated pressure using best straight line curve fit.

NOTE 7: Temperature output conversion function:


Standard Package