AXCX Series C-Grade

The Millivolt Output pressure sensors is based upon a proprietary packaging technology to reduce output offset or common mode errors. This model provides a calibrated millivolt output with good output offset characteristics.   In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.

These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like.  The C-GRADE is a lowest cost version of the millivolt output pressure sensors.

The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to +16 V is acceptable.

  • Features

    • 4 inH2O to 100 PSI Pressure Ranges
    • 1 % Linearity Version
    • Temperature Compensated
    • Calibrated Zero and Span
  • Applications

    • Medical Instrumentation
    • Environmental Controls
    • HVAC

equivalent Circuit

Pressure Sensor Maximum Ratings

Supply Voltage ,Vs

16 Vdc

Common-mode pressure

50 psig

Lead Temperature (soldering 2-4 sec.)

250°C

Environmental Specification

Temperature Ranges

-

Compensated

0 to 70°C

Operating

-25 to 85°C

Storage

-40 to 125°C

Humidity Limits

0 to 95% RH (non condensing)

Available Package

Click On Package Image Below To View Package Drawing

Help Me Choose

Choose A Part Number Below To View Performance Characteristics

Pressure Range Differential Absolute Gauge
4 inH2O 4 INCH-D-CGRADE-MV -- --
0.3 PSI 0.3 PSI-D-CGRADE-MV -- --
1 PSI 1 PSI-D-CGRADE-MV -- --
5 PSI 5 PSI-D-CGRADE-MV -- --
15 PSI 15 PSI-D-CGRADE-MV 15 PSI-A-CGRADE-MV --
30 PSI 30 PSI-D-CGRADE-MV -- --
100 PSI 100 PSI-D-CGRADE-MV -- --
150 PSI 150 PSI-D-CGRADE-MV -- --
 

30 PSI-D-CGRADE-MV Performance Characteristics

Close
PARAMETER MIN NOM MAX UNITS Notes
Operating Range, differential pressure -- 30.0 -- PSI -
Output Span 86 90 94 mV 5
Offset Voltage @ zero differential pressure -- -- ±1 mV -
Offset Temperature Shift (0°C-70°C) -- -- ±1 mV 2
Linearity, hysteresis error -- 0.5 1.0 %fs 4
Span Shift (0°C-70°C) -- -- ±2 %fs 2

Standard Pressure Range

Operating Pressure

0 - 30 PSI

Nominal Span

90 mV

Proof Pressure

90 PSI

Burst Pressure

150 PSI

Specification notes

Specification Notes
NOTE 1:  ALL PARAMETERS ARE MEASURED AT 12.0 VOLT EXCITATION, FOR THE NOMINAL FULL SCALE PRESSURE AND ROOM TEMPERATURE UNLESS
OTHERWISE SPECIFIED.  PRESSURE MEASUREMENTS ARE WITH POSITIVE PRESSURE APPLIED TO PORT B.


NOTE 2:  SHIFT IS RELATIVE TO 25°C.


NOTE 3:  SHIFT IS WITHIN THE FIRST HOUR OF EXCITATION APPLIED TO THE DEVICE.


NOTE 4:  MEASURED AT ONE-HALF FULL SCALE RATED PRESSURE USING BEST STRAIGHT LINE CURVE FIT.


NOTE 5:  THE VOLTAGE ADDED TO THE OFFSET VOLTAGE AT FULL SCALE PRESSURE.

Standard Package