MAMP Series Prime Grade

Send Me Product Information
Datasheet Download

The MAMP series pressure sensors are based on a proprietary technology to reduce all output offset or common mode errors. This model provides a calibrated amplified output with superior output offset characteristics. Output offset errors due to change in temperature, stability to warm-up, stability to long time period, and position sensitivity are all significantly reduced when compared to conventional compensation methods. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.

 

These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like.

 

The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage between 4.5 and 5.5 volts.

  • Features

    • 1 to 60 inH2O Pressure Ranges
    • Matched pressure port volumes
    • Temperature Compensated (-25 to 85°C)
    • Calibrated Zero and Span

  • Applications

    • Medical Instrumentation
    • Environmental Controls
    • HVAC

equivalent Circuit

Pressure Sensor Maximum Ratings

Supply Voltage VS

4.5 to 5.5

Common-mode pressure

Vdc

Lead Temperature (soldering 2-4 sec.)

10 psig 250°C

Environmental Specification

Compensated

-25 to 85°C

Operating

-40 to 125°C

Storage

-40 to 125°C

Humidity Limits

0 to 95% RH (non condensing)

Available Package

Click On Package Image Below To View Package Drawing

Help Me Choose

Choose A Part Number Below To View Performance Characteristics

Pressure Range Differential Absolute Gauge
1 inH2O 1 INCH-D1-P4V-MINI 1 INCH-D2-P4V-MINI -- 1 INCH-G-P4V-MINI
5 inH2O 5 INCH-D1-P4V-MINI 5 INCH-D2-P4V-MINI -- 5 INCH-G-P4V-MINI
10 inH2O 10 INCH-D1-P4V-MINI 10 INCH-D2-P4V-MINI -- 10 INCH-G-P4V-MINI
20 inH2O 20 INCH-D1-P4V-MINI 20 INCH-D2-P4V-MINI -- 20 INCH-G-P4V-MINI
30 inH2O 30 INCH-D1-P4V-MINI 30 INCH-D2-P4V-MINI -- 30 INCH-G-P4V-MINI
60 inH2O 60 INCH-D1-P4V-MINI 60 INCH-D2-P4V-MINI -- --
 

60 INCH-D2-P4V-MINI Performance Characteristics

Close
PARAMETER MIN NOM MAX UNITS Notes
Operating Range, differential pressure -- ±60.0 -- inH2O -
Output Span ±1.90 ±2.0 ±2.10 volt 5
Offset Voltage @ zero differential pressure 2.15 2.25 2.35 volt -
Offset Temperature Shift (-25°C-85°C) -- -- ±20 mvolt 2
Offset Warm-up Shift -- ±5 -- mvolt 3
Offset Position Sensitivity (±1g) -- ±5 -- mvolt -
Offset Long Term Drift (one year) -- ±5 -- mvolt -
Linearity, hysteresis error -- 0.05 0.25 %fs 4
Span Shift (-25°C-85°C) -- -- ±1 %span 2

Standard Pressure Range

Operating Pressure

±60 inH2O

Nominal Span

4V

Proof Pressure

500 inH2O

Burst Pressure

800 inH2O

Specification notes

NOTE 1: ALL PARAMETERS ARE MEASURED AT 5.0 VOLT EXCITATION, FOR THE NOMINAL FULL SCALE PRESSURE AND ROOM TEMPERATURE UNLESS OTHERWISE SPECIFIED. PRESSURE MEASUREMENTS ARE WITH POSITIVE PRESSURE APPLIED TO THE FRONT PORT.

NOTE 2: SHIFT IS RELATIVE TO 25°C.

NOTE 3: SHIFT IS WITHIN THE FIRST HOUR OF EXCITATION APPLIED TO THE DEVICE.

NOTE 4: MEASURED AT ONE-HALF FULL SCALE RATED PRESSURE USING BEST STRAIGHT LINE CURVE FIT.

NOTE 5: THE VOLTAGE ADDED TO THE OFFSET VOLTAGE AT FULL SCALE PRESSURE. NOMINALLY THE OUTPUT VOLTAGE RANGE IS 0.25 TO 4.25 VOLTS FOR MINUS TO PLUS FULL SCALE PRESSURE.

Standard Package