DLC Series

The DLC Series Compact High Resolution Sensor is based on All Sensors’ CoBeam2 TM Technology. This reduces package stress susceptibility, resulting in improved overall long term stability. This technology breakthrough advances the state of the art for piezoresistive pressure sensors beyond what has been achieved for low pressure sensing using silicon based strain technology.

The low supply voltage allows for integration of the sensors into a wide range of process control and measurement systems, as well as direct connection to I2C serial communications channels. The DLC series offers 16 bit digital resolution. The digital interface options ease integration of the sensors into a wide range of process control and measurement systems, allowing direct connection to serial communications channels. For battery-powered systems, the sensors can enter very low-power modes between readings to minimize load on the power supply.

These calibrated and compensated sensors provide accurate, stable output over a wide temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air and dry gases.

[Please refer to datasheet for package electrical specifications]

Features
- 1 inH2O to 150 PSI Pressure Ranges
- High Resolution 16 Bit Output
- Digital I²C Interface
- 1.8 to 3.6V Supply Voltage Range
- Compact Package sizes starting from 7mm x 7mm
Applications
- Medical Breathing
- Industrial Controls
- HVAC
- Environmental Controls
- Portable / Hand-Held Equipment

equivalent Circuit

Pressure Sensor Maximum Ratings

Supply Voltage (Vs)

3.63 Vdc

Common Mode Pressure

10 psig

Environmental Specification

Temperature Ranges

- Compensated

-20 to 85°C

- Operating

-40 to 85°C

- Storage

-40 to 125°C

Humidity Limits (non condensing)

0 to 95% RH

Available Package

Click On Package Image Below To View Package Drawing

Help Me Choose

Choose A Part Number Below To View Performance Characteristics

Pressure Range	Differential	Absolute	Gauge
1 inH2O	DLC_L01D	--	DLC_L01G
2 inH2O	DLC_L02D	--	DLC_L02G
5 inH2O	DLC_L05D	--	DLC_L05G
10 inH2O	DLC_L10D	--	DLC_L10G
20 inH2O	DLC_L20D	--	DLC_L20G
30 inH2O	DLC_L30D	--	DLC_L30G
60 inH2O	DLC_L60D	--	DLV-060G
5 psi	DLC_005D	--	DLC_005G
15 psi	DLC_015D	DLC_015A	DLC_015G
30 psi	DLC_030D	DLC_030A	DLC_030G
100 psi	DLC_100D	DLC_100A	DLC_100G
150 psi	DLC_150D	DLC_150A	DLC_150G

DLC_015D Performance Characteristics

PARAMETER	MIN	NOM	MAX	UNITS	Notes
Output Span (FSS)	-	±0.4 * 2^24	-	Dec Counts	1
Offset Output @ Zero Diff. Pressure (Osdig)	-	0.5 * 2^24	-	Dec Counts	-
Total Error Band	-	-	±1.25	%FSS	2
Pressure Digital Resolution - No Missing Codes (16-bit Option)	15.3	15.5	-	bit	-
Temperature Output - Resolution	-	16	-	bit	-
Temperature Output - Overall Accuracy	-	2	-	°C	-
Supply Current Requirement - During Active State (ICCactive)	-	2.0	2.5	mA	3, 4, 5
Supply Current Requirement - During Idle State (ICCidle)	-	100	250	nA	3, 4, 5
Power On Delay	-	-	2.5	ms	3
Data Update time (tDU)	-	(see datasheet for table)	-	ms	3, 4

Standard Pressure Range

Operating Range

±15 psi

Proof Pressure

30 psi

Burst Pressure

45 psi

Specification notes

NOTE 1: The Span is the algebraic difference between full scale decimal counts and the offset decimal counts. The full scale pressure is the maximum positive calibrated pressure.

NOTE 2: Total Error Band consists of offset and span temperature and calibration errors, linearity, and pressure hysteresis errors, offset warm-up shift, offset position sensitivity, and long term offset drift errors.

NOTE 3: Parameter is characterized and not 100% tested.

NOTE 4: Data update time is exclusive of communications, from command received to end of busy status. This can be observed as EOC pin low-state duration.

NOTE 5: Average current can be estimated as: ICCIdle + ((tDU / Reading Interval) * ICCActive.) Refer to Figure 2 for active and idle conditions of the sensor (the active state is while EOC pin is low).

NOTE 6: The sensor is calibrated with a 3.3V supply; however, an internal regulator allows a supply voltage of 1.68V to 3.6V to be used without affecting the overall specifications. This allows direct operation from a battery supply.

NOTE 7: Calibrated with continuous reads.